33000 Ft In Miles (2024)

FAQs

How many feet are in a mile 1 mile? ›

One mile = 5,280 feet.

Expert-Verified Answer

The cruising altitude of a plane is 30,000 ft, which is equal to approximately 5.68 miles.

A distance of 2,000 feet is a fraction, less than one-half, of a mile. A mile is 5,280 feet and is 5,280/2,000 = 0.264 of a mile, or a little over one-quarter of a mile.

Let's say you want to know how many feet are in 2 miles. To find that out, you would have to multiply two by 5,280, which equals 10,560 feet.

Using 2,000 steps in one mile as an average benchmark, 10,000 steps is approximately 5 miles.

One mile per minute is 60 miles per hour. The calculation starts with knowing that there are 60 minutes per hour. 1 mile per minute x 60 minutes per hour = 60 miles per hour. 1 mile per minute is also 88 feet per second.

That said, planes generally fly at higher altitudes — usually between 30,000 to 42,000 feet — because the air gets thinner the higher you go. When the air is thinner, planes can fly faster and more efficiently, using less fuel to maintain the speed required to develop lift.

On a standard skydive of 14,000 feet, you'll likely be in freefall for around 60 seconds. If you jump from 30,000 feet, though, you'll be falling for an amazing 2.5 minutes.

The highest verified altitude you can skydive from in the United States is 30,000 feet. For context, this is in the range of standard cruising altitude for a commercial airline and about 7 miles up. In other words, much higher than your average skydive at 10,000 feet or nearly 2 miles up!

With training, many walkers can finish a 26.2-mile walker-friendly marathon in about seven hours, with no breaks. That suggests that if a walker is well-trained and takes breaks, they can walk 20 miles in a day. If a walker doesn't take breaks and is going fast, they may be able to cover 30 miles in a day.

How long is Earth in feet? ›

The Earth's equatorial circumference is approximately 24,902 statute miles, or 131,482,560 feet. A circumference of any sphere or planet is a great circle.

Earth's circumference (the distance all the way around the equator) is 24,901 miles (40,075 kilometers). Its diameter (the distance from one side to the other through Earth's center) is 7,926 miles (about 12,756 kilometers).

Answer: 1 yard is 36 inches

A yard is an imperial unit of measuring length. Yard as a unit is often employed to measure the distance of longer lengths. Converting to SI units, one yard is equal to 0.9 meters. Using the metric conversion chart, we can easily see one yard is equal to 36 inches.

The quick way to determine 1000 feet in miles can be calculated by dividing 1000 feet by the number of feet in a mile. This is 1000 over 5,280, which comes out to . 19 of a mile. To be safe, 1000 feet is usually just considered one-fifth of a mile.

Yard and feet are used to measure the length. Both units are used in the imperial and US customary system of measurements. One yard is equal to three feet.

According to data gathered in a 2019 scientific study, it takes the average person 15-22 minutes to walk one mile. Remember that the weather, your age, the terrain you're walking on, and how fast you're walking are all factors that can impact your mile time.

A mile is equal to 1,760 yards, so a quarter mile is 1/4 of that distance, which is 1,760 yards / 4 = 440 yards. How long is half a mile? Half a mile is half of 5280 feet or 2640 feet. Half a mile is half of 1760 yards or 880 yards.

What's 1 Mile Look Like? Let's take a look at what a mile is. A mile is 5,280 feet, 1,760 yards, 1.6 kilometers, or 1,609 meters or 4 laps around an Olympic-sized track, plus 9 meters. If you're walking, it takes the average person 15-22 minutes to walk a mile.